shutter motor repair

We provide roller shutter motor repair service in your locality. When the time is right for you to get your roller shutter repaired, our experts can be on-site repairs within a short period of time.  Keeping your operations running smoothly is our number one goal. That’s why we offer affordable prices, 24/7 assistance, and expert, business-focused knowledge in roller shutter motor repair. For your peace of mind and prompt response, please contact us immediately and book our services.

Roller shutters work best when it closes slowly and evenly, which is where the motor comes in handy. A shaft connects the motor to the shutter’s wheel, and as the wheel moves up and down, the shutter slowly swings open or closed. If it didn’t, then this can be frustrating for homeowners who rely on their roller shutters for ventilation and security during hot weather months. And if you need to replace your entire window unit, that can be pricey too – so consider calling our shutter repair service before things get too out of hand.

How  Rollers Shutter Motor Works

The mechanism by which these motors work is actually fairly simple. Basically, a coil inside the motor magnets causes the coil spring to compress, which in turn creates a rotation. Most roller shutter motors have a capacitor connected to the coil spring to store energy until it is needed. This stored energy is then released when the coil spring compresses, causing rotation of the motor.

Are you wondering what types of roller shutter motors are available? If so, you’re in the right place. We provide repairs for all types of roller shutter motors, whether they are built by us or by another manufacturer. Also, we can repair any type of roller shutter motor, regardless of the make or model. We have knowledgeable technicians who are able to all types of roller shutter repair very quickly.

Reasons Roller Shutter Motors Fails

Roller shutter motors are typically located on vertical sliding doors and are used to open and close the door. There are many reasons why a roller shutter motor can fail, but some of the most common culprits include worn-out parts, defective bearings, and dirty and corroded connectors. If your roller shutter motor fails, don’t wait – get it fixed as soon as possible. Here are four reasons why a roller shutter motor can fail:

1) Worn-out parts and gears:  When the gears that drive your Roller Shutter Motor wear down over time, the tension on the strings that open and close the shutter can become too great. This can cause the motor to break down completely. In some cases, repairing the gear might be enough to restore function – but in other cases, a new roller shutter motor might be required.

2) Defective bearings: A common issue with roller shutter motors is defective bearings. These bearings help move the door along its track, and if they’re not functioning properly, the door will not move smoothly. This can cause the door to stick or even fall off its track.

3) Dirty and corroded connectors: Many times, dirt and corrosion will build up on connector pins over time. This causes problems in current flow and heat generated.

4) Electrical Problems: Another common cause of Roller Shutter Motor failure is electrical problems. If there’s an excessive amount of current flowing through the motor’s wires, it can cause them to heat.

How To Prevent a Shutter Motor Failure

If you’re like most homeowners, you probably don’t think about your roller shutter motor very much. After all, it’s just a small, low-power motor that helps your doors stay open in the wind and rain. But if your roller shutter motor fails, it can mean big problems. 

1. Check your rollers and contacts every year. A worn or dirty roller will cause your motor to overheat and eventually fail. Thoroughly clean your rollers and contacts every fall or winter using a damp cloth and mild soap. Never use any oil-based cleansers, solvents, or Hitachi cleaners on the gear gears or other moving parts.

2. Insulate your motor against heat and cold. Provide adequate ventilation around the motor so it can expel heat and waste products safely. If conditions are too cold or too hot, your motor will overheat and fail prematurely.

3 fasten screws securely to the mounting brackets on either side of the motor housing with at least two screws per bracket. Make sure the screws are fully tightened before roller shutter installation. Don’t use adhesives to secure the bracket

We Can  Replace a Failed Motor If Needed.

At our company, we specialize in repairing failed roller shutter motors. We understand the importance of reliable and efficient machinery, which is why we take care of every single one of our customer’s roller shutter motors. In addition, we offer a replacement service for any failed motor. We have a wide selection of motors to choose from, so you can find the one that fits your needs. Our team has experience in servicing roller shutter motors, so we can help get your business up and running efficiently again as soon as possible. We know that nobody wants to experience a malfunction in their machinery, which is why we are here to help. Contact us today to schedule a free inspection and estimate for your roller shutter motor.

Contact Us Anytime For Repair

Our team of experienced and knowledgeable engineers is always available to provide roller shutter motor repair service in your localities. We understand the importance of timely and accurate repairs, which is why we take the time to properly diagnose the issue and provide a viable solution. If you’re experiencing any trouble with your roller shutters motor, or need a repair done, don’t hesitate to reach out to our team. We provide expert service in all of the localities where we operate, so you can be sure that your repairs will be done right.